Protecting Your DJI Accessories (2026)
Your drone has a case (by model here). But the loose items in your bag are often worth more than the aircraft — DJI Goggles 3 run $499, an RC Pro 2 over $1,000 — and they’re the ones rattling against a battery charger right now.
At a glance
| Device | Pick | Price | |
|---|---|---|---|
| DJI Goggles 3 / 2 | Anbee Carrying Case | ~$20–25 | Check price |
| DJI Goggles N3 | Anbee N3 Case | ~$20–25 | Check price |
| Neo + N3 + Motion 3 | FSIDIWT Combo Bag | ~$25–35 | Check price |
| Mini 4 Pro + Goggles 3 | Lykus Titan MM420 | $79.99 | Check price |
| DJI RC 2 | STARTRC silicone + Skyreat protector | ~$25 both | Check price |
| DJI RC Pro 2 | STARTRC 2-in-1 kit | ~$20–30 | Check price |
| Osmo Pocket 3 / Action | PGYTECH Carrying Case | $29.95 | Check price |
| Osmo Action (budget) | Smatree EVA Case | ~$15–20 | Check price |
Goggles: the most fragile thing you own
Anbee Goggles 3/2 Carrying Case (~$20–25) is the most popular shell for a reason: molded semi-hard EVA, flannel lining, carabiner, and the goggles fit with antennas mounted — the detail that separates it from generic pouches. Check price
Goggles N3 owners: DJI ships the bulkier N3 with no case at all. The Anbee N3 version (~$20–25) is the default fix. Check price Flying a Neo with the motion combo? The FSIDIWT shoulder bag (~$25–35) swallows drone, N3 goggles, RC Motion 3 and four batteries — a kit no official DJI bag covers. Check price
One-case solution: the Lykus Titan MM420 ($79.99) is an IP67 hard case cut for a Mini 4 Pro and Goggles 3 together — unusual, and exactly right if that’s your kit. Check price
Controllers: protect the screen you stare at
The RC 2’s screen is its weak point. Two-part fix, ~$25 total: the STARTRC silicone cover (drop/scratch protection with stick storage, ~$12–16) Check price plus Skyreat matte tempered protectors (2-pack ~$10–13; the matte finish also cuts sunlight glare). Prefer glass-clear? SYMIK’s 3-pack is the alternative. Check price
For the RC Pro 2 — a four-figure controller — the STARTRC 2-in-1 kit (~$20–30) covers all three failure modes at once: tempered glass for the screen, silicone sleeve for drops, sunshade for washout. Check price
Osmo Pocket 3 and Action cameras
PGYTECH Carrying Case ($29.95, verified) is the most polished option: EVA nylon waterproof shell, flannel lining and six movable dividers that adapt from bare camera to full Creator Combo. Fits Osmo Pocket 3, Osmo Action 6/5 Pro/4/3, GoPro and Insta360. Check price
The STARTRC hard shell for the Pocket 3 Creator Combo (~$25–35) molds each accessory its own slot — owners call it the gold standard for protection, at the cost of flexibility. Check price On a budget, the Smatree EVA case (~$15–20) has been the action-cam favorite for years and fits the current Action lineup. Check price
Shooting on a dedicated action cam too? See our action camera cases guide for GoPro, Osmo and Insta360 protection.
The math that makes this easy
A typical FPV kit — Goggles 3, RC 2, spare batteries — is ~$800 of electronics. Protecting all of it costs about $50. There is no other place in the drone hobby where $50 removes this much risk. What “shockproof” EVA actually does mechanically: materials explainer.
FAQ
Do goggles really need a case inside a backpack?
Yes — lens-against-battery is the classic backpack kill. Molded EVA keeps pressure off the optics.
Is the Pocket 3 waterproof in a case?
No — these are transport cases. The Pocket 3 itself isn’t waterproof; for wet shoots you need a dedicated dive/waterproof housing.
Will the STARTRC silicone cover fit in my drone case’s controller slot?
Often not — molded foam slots are cut for a bare controller. Check before buying both, or keep the skin for hand-carry days.